Step 3: xTool M2
- 1 Make
- 2 Model
- 3 Next step
xTool M2 is supported by our technician network.
We have 165 published code notes for xTool in the knowledge base.
Or use Ask Kerfwise on the homepage.
Codes linked to this model (165)
- Flame detected
- Air Assist error
- Focus failed
- Lid open
- Connection failed
- M505 S1 — M505 S1 — M505 S1 / Flame Alarm
- E10 — E10 — E10 / Interlock Open
- Water cooling flow error
- Inkjet module not recognised
- M222 S4 — M222 S4 — Device moved
- M222 S7 — M222 S7 — Start processing without a project file or with the lid opened
- M222 S9 — M222 S9 — Flame detected
- M222 S20 — M222 S20 — The device reached position limits during processing
- M222 S21 — M222 S21 — Communication exceptions between the Wi-Fi module and the main controller
- M222 S22 — M222 S22 — Communication exceptions between the laser module and the main controller
- M363 S0 — M363 S0 — Distance measurement exceptions.
- M363 S2 — M363 S2 — Distance sensor signal exceptions.
- M363 S3 — M363 S3 — The distance sensor has not been reset.
- M363 S4 — M363 S4 — Distance measurement exceptions.
- M363 S5 — M363 S5 — Distance measurement exceptions.
- M53 T0 — M53 T0 — SD card exceptions or failure
- M53 T0 — M53 T0 — The flash storage encounters an exception or is damaged
- M53 C1/C2/W2 — M53 C1/C2/W2 — Baseplate or riser base exception
- M53 I0 — M53 I0 — Light interference detected
- M53 S0 — M53 S0 — Access-control key removed
- M53 W0 — M53 W0 — Laser module overtemperature
- M53 F5 — M53 F5 — Flame risk detected
- M8 — M8 — Motor driver chip errors
- M53 L1 — M53 L1 — Cleaning the laser module
- Qx14 1 — Qx14 1 — X-Axis Homing Failed