Connection failed
xTool · xTool xTool Creative Space (XCS)
What it means
XCS cannot find the machine or loses the USB or Wi-Fi link.
Can I keep running?
KB severity: Machine down
The knowledge base lists this as a machine-down fault. Stop the job and do not keep running until a technician has checked the machine.
The knowledge base records some owner-level checks for this fault. That is not a repair procedure from Kerfwise.
Where it points in the machine
communication (USB / Wi-Fi link)
Source: Scan3D Lab (independent FR/UK site), card "Connection failed" (publisher text only)
Models and controllers with this code
Source: Scan3D Lab (independent FR/UK site), card "Connection failed" (publisher text only)
Related codes on this system
Related symptoms in the knowledge base
- XCS cannot find the machine over USB
- Software stops working with the machine after a firmware upgrade (XCS or Studio below 1.6)
- mLaser will not connect to the machine
- CO2 laser tube will not fire although the laser switch is on (Thunder Nova/Mini: causes listed are beam path misalignment, loose PSU or contactor wiring, failed tube or PSU, failed opto-isolator or controller laser signal port)
Do not attempt DIY repair on high-voltage or Class 4 laser equipment. Get a technician. You can request one using the form on this page.
Get a tech on it