Step 3: xTool S1
- 1 Make
- 2 Model
- 3 Next step
xTool S1 is supported by our technician network.
Systems and controllers we have notes for
Or use Ask Kerfwise on the homepage.
Codes linked to this model (33)
- Flame detected
- Air Assist error
- Focus failed
- Lid open
- Connection failed
- M505 S1 — M505 S1 — M505 S1 / Flame Alarm
- E10 — E10 — E10 / Interlock Open
- Water cooling flow error
- Inkjet module not recognised
- M222 S4 — M222 S4 — Device moved
- M222 S7 — M222 S7 — Start processing without a project file or with the lid opened
- M222 S9 — M222 S9 — Flame detected
- M222 S20 — M222 S20 — The device reached position limits during processing
- M222 S21 — M222 S21 — Communication exceptions between the Wi-Fi module and the main controller
- M222 S22 — M222 S22 — Communication exceptions between the laser module and the main controller
- M363 S0 — M363 S0 — Distance measurement exceptions.
- M363 S2 — M363 S2 — Distance sensor signal exceptions.
- M363 S3 — M363 S3 — The distance sensor has not been reset.
- M363 S4 — M363 S4 — Distance measurement exceptions.
- M363 S5 — M363 S5 — Distance measurement exceptions.
- M53 T0 — M53 T0 — SD card exceptions or failure
- M53 T0 — M53 T0 — The flash storage encounters an exception or is damaged
- M53 C1/C2/W2 — M53 C1/C2/W2 — Baseplate or riser base exception
- M53 I0 — M53 I0 — Light interference detected
- M53 S0 — M53 S0 — Access-control key removed
- M53 W0 — M53 W0 — Laser module overtemperature
- M53 F5 — M53 F5 — Flame risk detected
- M8 — M8 — Motor driver chip errors
- M53 L1 — M53 L1 — Cleaning the laser module
- M9039 S4 — M9039 S4 — Exceptions occur