Capacitance became 0
Friendess · Friendess BCS100
What it means
The controller cannot measure nozzle capacitance and shows zero.
This alarm meaning was translated from non-English source material.
Can I keep running?
KB severity: Machine down
The knowledge base lists this as a machine-down fault. Stop the job and do not keep running until a technician has checked the machine.
The knowledge base records this fault at technician fix level.
Where it points in the machine
height_sensing (cutting head capacitance sensor / amplifier)
Source: CNCU (South Africa reseller), ch4 s4.1.9 p40 (publisher text only)
Source: CNCU (South Africa reseller), ch4 s4.1.9 p40 (publisher text only)
Related codes on this system
Related symptoms in the knowledge base
- XCS cannot find the machine over USB
- mLaser shows hexagons, double lines or overspeed on imported DXF/SVG
- CO2 laser tube will not fire although the laser switch is on (Thunder Nova/Mini: causes listed are beam path misalignment, loose PSU or contactor wiring, failed tube or PSU, failed opto-isolator or controller laser signal port)
Do not attempt DIY repair on high-voltage or Class 4 laser equipment. Get a technician. You can request one using the form on this page.
Get a tech on it